| Customization: | Available |
|---|---|
| Carrier: | HDPE |
| Color: | White |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
|
Performance of the project
|
Test condition [condition]
|
The test method
|
The test data
|
The data unit
|
|
|
Basic performance
|
Density mass index
|
|
GB/T 1033
|
0.948±0.002
|
g/cm3
|
|
Density test results
|
|
GB/T 1033
|
0.948
|
g/cm4
|
|
|
Melt flow rate mass index
|
190ºC/5.0kg
|
GB/T 3682
|
0.23±0.03
|
g/10min
|
|
|
Melt flow rate test results
|
|
GB/T 3682
|
0.25
|
g/10min
|
|
|
Melt flow rate mass index
|
190ºC/21.6kg
|
GB/T 3682
|
6.2±1.5
|
g/10min
|
|
|
Melt flow rate test results
|
|
GB/T 3682
|
6.4
|
g/10min
|
|
|
Mechanical properties of
|
Tensile yield strength quality index
|
|
GB/T 1040
|
≥23
|
MPa
|
|
Test results of tensile yield strength
|
|
GB/T 1040
|
27.6
|
MPa
|
|
|
Elongation at break quality index
|
|
GB/T 1040
|
≥600
|
%
|
|
|
Test results of elongation at break
|
|
GB/T 1040
|
804
|
%
|
|
|
Quality index of impact strength of simply supported beam
|
|
GB/T 1043
|
≥25
|
KJ/m2
|
|
|
Test results of impact strength of simply supported beam
|
|
GB/T 1043
|
26.7
|
KJ/m2
|
|
|
Other properties
|
Volatile matter quality index
|
|
GB/T 15658 1
|
≤350
|
mg/kg
|
|
Volatile test results
|
|
GB/T 15658 1
|
Did not check out
|
mg/kg
|
|
|
Biochemical property
|
Cleanliness (color granule) quality index
|
|
SH/T 1541
|
≤20
|
grain/kg
|
|
Cleanliness (color particle) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
|
|
Cleanliness (impurities) quality index
|
|
SH/T 1541
|
≤60
|
grain/kg
|
|
|
Cleanliness (impurities) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
|
1.Fiber ( Carpet, Textils, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,Toys, etc.)
25kg/ carton or 25kg/bag, or per your requirement
25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container
1.We are able to provide customized service based on your requirements.
2. Competitive prices - directly from factory to customer.
3.Advanced equipments for testing and manufacturing.
4.Professional and good after-sale service
5. Free sample for testing
){kind=link}